ITT Hoffman Series C & X Steam Traps In Stock

Manufacturer:
ITT Hoffman
Description:

The Hoffman Specialty F&T traps Series C & X are recommended for modulating pressures where varying loads are present, and steam pressures vary from maximum to vacuum. The Series C & X traps vent air at very low pressures, handle start up air loads, operate against back pressure and provide continuous condensate drainage. The Hoffman Specialty "X" series F&T traps are high capacity steam traps: Use anywhere that heat is quickly disbursed, thereby creating a lot of condensate. These F&T traps have the inlet on the top end of the steam trap's cover, and the outlet on the bottom end of the steam trap cover. The "X" Series cast iron trap is available in working steam pressures of 15, 30, 75, 125 & 175 psi. The 2" FTO30X, same end inlet to outlet center-to-center dimension of 6-5/8", a height of 15", a width of 10", a depth of 15-1/2", and a weight of 70lbs.

Item Name: ITT Hoffman Series C and X
Description:

For large high capacity units. Sizes available: Series C: 1 1/4" NPT, 1 1/2" NPT, 2" NPT, 2 1/2" NPT Series X: 2" NPT. Resistant to water hammer and corrosion. Below condensate level seat design prevents steam leakage. Rugged stainless steel thermostatic element eliminates air binding. Stainless steel internal components. Can be serviced without dismantling piping. Maximum operating pressure 175 psig. Maximum temperature 377°F (192°C).

Lead Time: Most sizes IN STOCK. Available for quick-ship.
Ordering Information
Model Number Part Number NPT Size in. Seat Diff. Pressure psi Housing Pressure psi Weight, lbs.  
FT015C 404230 1 1/2 15 175 18 Add to RFQ
FT015C 404240 2 15 175 33 Add to RFQ
FT015X 404242 2 15 175 108 Add to RFQ
FT015C 404244 2 1/2 15 175 175 Add to RFQ
FT030C 404232 1 1/2 30 175 18 Add to RFQ
FT030C 401887 2 30 175 33 Add to RFQ
FT030X 401899 2 30 175 108 Add to RFQ
FT030C 401875 2 1/2 30 175 175 Add to RFQ
FT075C 404224 1 1/4 75 175 18 Add to RFQ
FT075C 404234 1 1/2 75 175 18 Add to RFQ
FT075C 401890 2 75 175 33 Add to RFQ
FT075X 401902 2 75 175 108 Add to RFQ
FT075C 401878 2 1/2 75 175 175 Add to RFQ
FT125C 404226 1 1/4 125 175 18 Add to RFQ
FT125C 404236 1 1/2 125 175 18 Add to RFQ
FT125C 401893 2 125 175 33 Add to RFQ
FT125X 401905 2 125 175 108 Add to RFQ
FT125C 401881 2 1/2 125 175 175 Add to RFQ
FT175C 404228 1 1/4 175 175 18 Add to RFQ
FT175C 404238 1 1/2 175 175 18 Add to RFQ
FT175C 401896 2 175 175 33 Add to RFQ
FT175X 401907 2 175 175 108 Add to RFQ
FT175C 401884 2 1/2 175 175 175 Add to RFQ
Dimensions in.
NPT Size in. A B C D E F G H J K L  
1 1/4 4 1/4 8 5/16 8 9/16 3 3 3/8 2 --- 45/64 1 3/8 --- --- Add to RFQ
1 1/2 4 1/4 8 5/16 8 9/16 3 3 3/8 2 --- 45/64 1 3/8 --- --- Add to RFQ
2 - Std. 7 3/16 10 1/8 10.5 4 15/16 2 11/16 3 1/4 1/2 1/8 --- --- --- Add to RFQ
2 -X 10 15 15 1/2 6 5/8 4 3/4 3 1/2 --- --- --- --- --- Add to RFQ
2 1/2 14 1/2 20 1/4 17 3/8 9 1/2 14 15/16 6 1/4 5 12 1 5/8 4 1/2 7 Add to RFQ
Comparison Chart (Dimensions in.)
Size Manufacturer A B  
1 1/2" Hoffman FT015C 3 23/32 Add to RFQ
1 1/2" Spirax FT15 3 23/32 Add to RFQ
2" Hoffman FT015C 4 15/16 1/8 Add to RFQ
2" Spirax FT15 4 15/16 1/8 Add to RFQ
2" Dunham Bush 30-8A 5 7/16 1 1/2 Add to RFQ
2" Hoffman FT015X 6 5/8 0 Add to RFQ
2" Armstrong 15-J8 6 5/8 0 Add to RFQ
2" Spirax FTB-20 4 1/2 1/2 Add to RFQ
2 1/2" Hoffman FT015C 9 1/2 0 Add to RFQ
2 1/2" Armstrong 30-L10 11 5/16 0 Add to RFQ
2 1/2" Spirax FTB-125 7 1/4 1 7/16 Add to RFQ
Other Recommended Products: