Marvel gage glass washers are molded from high‐quality EPDM (ethylene propylene diene monomer) designed to provide reliable sealing in liquid level gauge assemblies. These washers are engineered to operate within a temperature range of approximately -65 °F to +300 °F and offer strong resistance to steam, water and many industrial chemicals. They are available in a variety of standard sizes to fit common gauge glass assemblies and are supplied in multi-packs (6 or 12 pieces) depending on size. During installation, ensure the sealing surfaces are clean and free of scale or pitting, and replace the washer whenever the gauge glass is removed to maintain a proper seal.
Items to be returned must be approved by Power Plus International, and may be subjected to a restocking fee
Notice: Due to the uncontrollable metal costs, all prices and delivery times are subject to change on a daily basis.
PPI™ and Power Plus International™, and related marks and logos displayed on the Site, are our trademarks and may not be used in any way without our prior express written permission. Nothing contained on the Site shall be construed as granting, by implication, estoppel or otherwise, any license or right to use any of our marks displayed on the Site without our prior express written permission. All other trademarks not owned by us that appear on this Site are the property of their respective owners.
*NOTE: The products described herein are not manufactured by Patterson-Kelley nor is Power Plus
International in any way associated or affiliated with "PK", Patterson-Kelley, or Harsco Corporation.
|
Contact Us Directly:
|
Mailing Address:
|
|
Contact Us Directly:
|
© 2025 Boiler Supplies. All Rights Reserved. |
Mailing Address:
|
