Viton gauge glass washers are used in applications requiring higher temperature and chemical resistance than standard rubber materials. They create a tight seal between the gauge glass and the gauge body in high-pressure or high-temperature boiler service. Viton performs well in environments with steam, oils, fuels, and many industrial chemicals, maintaining elasticity and strength up to approximately 400 °F (204 °C). It is not recommended for continuous exposure to hot water or low-molecular-weight organic acids. Sealing surfaces should be clean and free of corrosion before installation, and washers should be replaced each time the gauge glass is changed. Store in a cool, dry location away from sunlight to preserve material performance.
Items to be returned must be approved by Power Plus International, and may be subjected to a restocking fee
Notice: Due to the uncontrollable metal costs, all prices and delivery times are subject to change on a daily basis.
PPI™ and Power Plus International™, and related marks and logos displayed on the Site, are our trademarks and may not be used in any way without our prior express written permission. Nothing contained on the Site shall be construed as granting, by implication, estoppel or otherwise, any license or right to use any of our marks displayed on the Site without our prior express written permission. All other trademarks not owned by us that appear on this Site are the property of their respective owners.
*NOTE: The products described herein are not manufactured by Patterson-Kelley nor is Power Plus
International in any way associated or affiliated with "PK", Patterson-Kelley, or Harsco Corporation.
|
Contact Us Directly:
|
Mailing Address:
|
|
Contact Us Directly:
|
© 2025 Boiler Supplies. All Rights Reserved. |
Mailing Address:
|
