RECEIVER: Cast iron receivers are standard. Steel receivers are available as an option. Maximum internal receiver pressure is 5 psi. Receivers are designed for venting to atmosphere.
PUMP: Bronze fitted centrifugal design, flanged to the receiver with leakless mechanical shaft seal. The seal chamber has a relief line back into the receiver to prevent air pockets or collection of abrasives near the mechanical seal. Motor and rotating assembly are removable without disturbing return or discharge piping. Maximum water temperature at pump suction is 210°F.
MOTOR: Drip-proof ball bearing design. Units are available with 1750 RPM or 3450 RPM motors.
FLOAT SWITCH: One for each pump, provides automatic operation, mounted and wired on unit.
STARTERS: All polyphase units (208-230/460v), and integral hp, single phase units (115/230v.) are furnished with magnetic starters mounted and wired on the unit. Single phase fractional hp motors have built-in overload protection and do not require magnetic starters.
Items to be returned must be approved by Power Plus International, and may be subjected to a restocking fee
Notice: Due to the uncontrollable metal costs, all prices and delivery times are subject to change on a daily basis.
PPI™ and Power Plus International™, and related marks and logos displayed on the Site, are our trademarks and may not be used in any way without our prior express written permission. Nothing contained on the Site shall be construed as granting, by implication, estoppel or otherwise, any license or right to use any of our marks displayed on the Site without our prior express written permission. All other trademarks not owned by us that appear on this Site are the property of their respective owners.
*NOTE: The products described herein are not manufactured by Patterson-Kelley nor is Power Plus
International in any way associated or affiliated with "PK", Patterson-Kelley, or Harsco Corporation.