The Pro Strom Condensate Pump Series of cast iron pumps offer superior unmatched performance, available in 1 hp through 2-1/2 hp models. The Pro Storm Condensate models offer "single body fill" priming to 25-foot lifts, in less than 5 minutes! The Condensate pumps exceed the strict safety requirements of Underwriter Laboratory UL778, and CSA.
The unique construction of these pumps makes this the perfect pumps for in-ground condensate tank removal. Simplex Condensate Unit (24" to 36" Diameter Plate) Available up to 8' in length Duplex Condensate Unit with M/A (24" to 36" Diameter Plate) Available up to 8' in length Our Unit fits your existing Pit. Just unbolt your in-ground condensate unit and bolt ours in place. Replace your Weinman, Weil, Sterling, Skidmore, Chicago Pump, etc. Note: All single phase motors are shipped from the factory set at 230 volt
Call us with any questions! 770-957-9599
Specifications:
HP | Voltage | Phase | Suction | Discharge | PSI | Ft Head / GPM | ||
---|---|---|---|---|---|---|---|---|
|
2 | 115/230 | 1 | 2" | 2" |
20 30 40 50 |
46.2 / 75 69.3 / 64 92.4 / 39 115.5 / 30 |
Add to RFQ |
|
2 | 208-230/460 | 3 | 2" | 2" |
20 30 40 50 |
46.2 / 75 69.3 / 64 92.4 / 39 115.5 / 30 |
Add to RFQ |
|
3 | 115/230 | 1 | 2" | 2" |
20 30 40 50 |
46.2 / 82 69.3 / 70 92.4 / 56 115.5 / 40 |
Add to RFQ |
|
3 | 208-230/460 | 3 | 2" | 2" |
20 30 40 50 |
46.2 / 82 69.3 / 70 92.4 / 56 115.5 / 40 |
Add to RFQ |