Warrick Controls
Series 16 & 16D

Boiler Controls for general purpose single-level or differential applications, these warrick controls have spade terminals for easy wiring and provide sensitivities up to 1 million Ohms/cm. Series 16D controls are similar to Series 16, but include DPDT load contacts to eliminate the need for slave relays.

Warrick Boiler Control
Series 26

Boiler controls for boiler low-water cutoff protection. A snap-through standoff mounting device is available for Series 26 units. Optional Power Outage feature resets after nuisance outages. Optional reset button is used when device has been deactivated because of low water condition. Reset is functional only if water has returned to normal level. 3 second or 6 second time delays available.
 

Warrick Controls
Series DF

Dual function Series DF boiler controls are designed to control two independent level functions: one single-level control operation and one differential-level operation. Optional Power Outage feature resets after nuisance outages. Optional Reset Button is used when device has been deactivated due to low water condition. Reset is activated only after water has returned to normal level. This warrick control is ideal in applications on boilers, food service equipment, and chemical delivery systems.
 

Warrick Boiler Control
Series 17, 27, & 37

Warrick Series 17 intrinsically safe boiler controls have SPST isolated contacts and are FM Approved for use in Class I or II, Division 1, Groups A through G hazardous locations. Sensitivity is field-selectable through the use of external resistors supplied with the control.
 

Warrick Controls
Series 47

Warrick Series 47 intrinsically safe controls offer complete alarm panel control in a single package. Powered output contacts allow quick connection of lights and audible alarms. Test and silence functions are built in. Unit also carries one SPDT master alarm contact for remote alarm activation. Approved for Class I, II, III, Division 1, Groups C, D, E, F, G hazardous atmospheres, Series 47 controls supply four channels which can be used with conductivity-based liquid level sensors or dry contact sensors. This device functions as an alarm or single point control. Field adjustable for direct or inverse operation, it can operate separate visual alarms with a common audible alarm channel. Silence and test terminals are standard. For additional lights, alarms or outputs, auxiliary contacts must be ordered.
 

Warrick Boiler Control
Series 67

Series 67 four channel level controls are an ideal solution for liquid level problems in hazardous locations for the sewage, waste water, chemical and groundwater remediation industries. Connected to floats or conductance probes this versatile control provides simplex or duplex pump/solenoid valve control; automatic or manual alternation; high and/or low level alarms with silence/ acknowledge capabilities. Series 67 controls can be used in hazardous applications as an intrinsically safe interface to non-powered contacts and sensors such as push button operators, limit, temperature, pressure and vacuum switches. Its low cost, integrated features and compact size also make it ideal for non-hazardous applications.
 

Warrick Controls
Series 16M & 16HM

Engineered for general purpose single-level or differential service, Warrick Series 16M controls combine the reliability of solid state electronics and the convenience of a plug-in design.

Warrick Boiler Control
Series 16DM & 16VM

Warrick Series 16DM plug-in controls provide general purpose single-level or differential service with DPDT load contacts to eliminate the need for slave relays.

Warrick Controls
Series 26M

Warrick Series 26M is designed for boiler low-water cutoff protection and meets CSD1 requirements for boiler low water cutoff. If non-powered contacts are required.
 

Warrick Boiler Control
Series 19MR

Series 19MR boiler controls are the ideal choice where pump up or pump down service is necessary. This Warrick control eliminates the need for contactors because it can directly handle motors up to 1 HP at 120 VAC, or motors up to 2 HP at 240 VAC.
 

Warrick Boiler Control
Series 1

Warrick Series 1 electromechanical controls offer 2 or 3 pole output contacts with a 16 amp rating. These versatile controls can be configured for single level service, differential control, low water cutoff control (with manual reset or lock out capability) and many other functions.
 

 Please call 1-800-780-3776 for pricing and availability.