Armstrong Tube Bundles

U-Tube Heat Exchangers
Armstrong Series WS Water to Steam

Armstrong type WS Heat Exchangers are of shell and tube construction designed for instantaneous heating or cooling of water or other liquids.

A popular application of the WS exchangers is the heating of water with steam for hot water radiation, while various fluids in applications ranging from swimming pools to industrial processes. Construction of these units would depend upon the fluids used in both the shell and the tubes.

Both types of tube bundles are available in either 2- or 4-pass construction, the U Bend tubes expanded into a stationary tube sheet. This construction easily allows for expansion and contraction caused by temperature variations. Units can be connected to any steam boiler or system; however the capacity of the boiler should be sufficient to handle the load imposed by the heat exchanger. In addition, some method of controlling the flow to the exchanger should be provided and installed according to manufacturer's directions.

Features:
- Steel shells
- Heavy-duty U-bend copper tubes
- 2- and 4-Pass construction
- Constructed in accordance with ASME Code Section VIII, Div.1
- 4" to 36" diameter in varying lengths
- WS - Water in tubes, steam in shell

Please give us a call for pricing!
1-800-780-3776

Material and Pressures

Typical Applications and Installations

| | Services | Search PPI | Contact Us |

© 2011 to 2012. Power Plus International. All rights reserved.