|
The
Series 700 Gauge Cocks
have Drop Forged Steel Bodies, Stainless
Steel Trim, Screwed Renewable Seat and
Safety Ball Checks to shut off the flow
automatically if the glass should break.
The ball can be omitted upon request.
The various types of connections that
are available make them adaptable for
most piping requirements.
The special Offset
feature was designed to facilitate easy
cleaning of the inside of the gauge. The
drain and vent connections are in a
direct line with the gauge liquid
chamber and are offset 7/8” from the
center line of the vessel connection. It
is possible to clean the inside of an
end connected gauge through the drain
and vent connections without removing
the gauge from service.
The union gauge
connections when used on end connected
gauges makes it possible to turn the
gauge to any desired angle for the most
convenient visibility; when connected to
the side of the gauge, it is possible to
mount the gauge in an inclined position
at any desirable angle.
The union vessel
connections make installation easier
and provides access to the ball check.
Gauge cocks furnished
with Handwheel operation.
|
