|
The ARCHON
model RM and TM are available in
Single and Multiple Section type sizes 1
through 9 with a one piece liquid
chamber, machined from solid bar stock
of cold rolled carbon steel, stress
relieved and assembled complete with
drop forged steel covers, tempered
borosilicate glasses, resistant to
thermal shock, heat, corrosion and
abrasion; gaskets; bolts and nuts. The
liquid chamber is recessed for each
individual glass and the gasket fits
into this recess snugly, so it cannot be
forced out in any direction by internal
pressure.
The bolts are properly spaced to insure
a uniform pressure on the gaskets and
glass and are of high temperature steel.
The gaskets used
are of the finest quality, uniform in
thickness and accurately die cut. The
standard gasket material is compressed
non-asbestos, but can be furnished in
other materials most suitable for the
liquid involved. These gauges can also
be furnished in other special metals
such as Stainless Steel, Monel, etc.
Connections:
1/2” or 3/4” NPT - End, Side, or
Back Connections.
Note:
Gauges Stocked in 3/4” NPT Female End
Connections Only.
Installation Instructions for
Transparent Gauges
|
