|
The
ARCHON model RL and TL are low
pressure gauges. These models are
available in Single and Multiple Section
type sizes 4 through 9 with a one piece
liquid chamber, machined from solid bar
stock of cold rolled carbon steel,
stress relieved and assembled complete
with drop forged steel covers, tempered
borosilicate glasses, resistant to
thermal shock, heat, corrosion and
abrasion; gaskets; bolts and nuts. The
liquid chamber is recessed for each
individual glass and the gasket fits
into this recess snugly, so it cannot be
forced out in any direction by internal
pressure.
The
gaskets used are of the finest quality,
uniform in thickness and accurately die
cut. The standard gasket material is
compressed non-asbestos, but can be
furnished in other materials most
suitable for the liquid involved. These
gauges can also be furnished in other
special metals such as Stainless Steel,
Monel, etc.
**It
is not recommended to use low
pressure gauges for steam applications**
Connections: 1/2” or 3/4” NPT -
End, Side, or Back Connections.
Note:
Gauges Stocked in 3/4” NPT
Female End Connections Only.
Installation Instructions for
Transparent Gauges
|
