|
Choosing the right pump can be
difficult. It may be easy enough to find a pump
that will do the job, but it gets trickier when you want
an exact match. There are many good reasons
to avoid over-capacity, with energy conservation at the
top of the list. The CR range lets you choose
pumps which exactly match you system demands.
CR is available in 11 hydraulic sizes, four basic
materials and about one million configurations.
You can get CR pumps with magnetic drives, with
air-cooled shaft seal chambers, with double shaft seals,
etc. Special CR pumps are available for
high-pressure performance, for aggressive liquids, and
much more. And there is a CR pump for almost any
liquid you could possible want to pump. |
|
What can you pump with a CR? |
| Aggressive or
Corrosive Liquids |
Seawater, hypochlorites,
hydrochloric acid, ferric chloride, nitric acid,
chromic acid, phosphoric acid |
|
Abrasive liquids |
Metasilicate-containing
cleaning agents, abrasive alkaline cleaners,
phosphates |
Toxic or
explosive
Liquids |
Trichlorethylene, toluene,
petroleum, ethyl alcohol, methyl alcohol |
High-viscosity
Liquids |
Glycols,
carboxylates (for cooling), lubricating oils,
rapeseed oil |
Crystallizing
Liquids |
Glycol additives, naphthalene,
sugar products (ex. dextran), salts |
High
Pressures |
Water
treatment, cleaning/washing |
Extreme
Temperatures |
Petrochemicals, oils, boiler
feed, secondary coolants |
|
