Air Flow 110 Gallon Condensate and Boiler Feed Systems
Call for price and delivery!


 

Standard Features:
-Welded corten steel (copper bearing) receivers coated and painted.

-Stainless steel receivers available on all models as options. 

-Two intake ports on each receivers to simplify installation.

-Heavy duty open drip proof motors with canopy, designed and engineered for continuous duty, ball bearings pre-lubricated for maintenance free operation, shaft is threaded stainless steel, capacitor start, induction run, built in thermal overload protection, separate enclosed room for switching components.

-Vapor tight heavy reverse acting float switch, air gap fitting, solenoid valve or mechanical makeup.

Air Flow Units are rugged, dependable closed coupled bronze fitted:
Volute: Cast iron
Seal Plate: Cast iron (tapped and threaded, vented to assure seal flush and lubrication)
Impeller: Silcone bronze
Mechanical shaft seal: John Crane type 21 or equal, ceramic and carbon seal faces. Buna-N elastomer stainless steel metal parts.
Volute gasket: Cellulose fiber chloroprene.
Water Slinger: Neoprene

 

Maximum Limits: Working pressure:
(1/2 H.P. thru 2 1/2 H.P.) 100 psi
(3 H.P. thru 10 H.P.) 180 psi.
Liquid temperatures 250 degrees F.

-1/2 HP - 5 HP models available

 -Isolation valves situated between the pump  and receiver
-Simplex or Duplex custom control panel available
-Single phase and three phase pumps available
-Simplex and duplex pump setup
-TEFC and ODP Motors available
-Liquid Level gauge glass assembly
-Thermometer
 

 Optional Control Panel Information

Specify Discharge Pressure Required
Discharge Pressure
Model Number Rec.
Size		 HP PSI Head in Feet GPM Discharge
Simplex Duplex
AFP-110S-C AFP-110DS-C 110 Gal 1/2 10
20
30		 23.1
46.2
69.3		 35
28
15		 1"
AFP-110S-D AFP-110DS-D 110 Gal 3/4 10
20
30
40		 23.1
46.2
69.3
92.4		 54
36
27
10		 1"
AFP-110S-E AFP-110DS-E 110 Gal 1 10
20
30
40		 23.1
46.2
69.3
92.4		 58
50
40
25		 1"
AFP-110S-F AFP-110DS-F 110 Gal 1-1/2 10
20
30
40
50		 23.1
46.2
69.3
92.4
115.5		 69
62
50
35
10		 1"
AFP-110S-G AFP-110DS-G 110 Gal 2 10
20
30
40
50		 23.1
46.2
69.3
92.4
115.5		 82
75
64
39
30		 1-1/2"
- AFP-110DS-H 110 Gal 2-1/2 10
20
30
40
50
60		 23.1
46.2
69.3
92.4
115.5
138.6		 90
82
70
56
40
18		 1-1/2"

**up to 5 HP available, call for details on higher HP models
Note: These are common part numbers, other configurations are available upon request

 


110 Gallon Unit Measurements (in)
B C D E G J K N
4 1.5 34 30 30 41 26 30.6

 

 

Optional Control Panel Information

1. Simplex Panels

  • Square D NEMA rated starter

  • Hand Off Auto Switch

  • Overload and Single Phase Protection

  • Optional Fused Disconnect

2. Duplex Control Panel:

  • Duplex Square D NEMA rated starters

  • Hand Off Auto Switch

  • Overload and Single Phase Protection

  • Optional Fused disconnects

  • Optional electronic alternation

  • Optional pilot running lights

3. Duplex Boiler Feed Panel:

  • Duplex Square D NEMA rated starter

  • Hand Off Auto Switches

  • Pilot Running Lights

  • Fusible Disconnects

  • Terminal Strip

  • 110v Power Source for Solenoid valve

  • Optional electronic alternation

NOTE: Panels also available in triplex and Quad setups. Other options required by customer are available upon request.

 

  

Contact Us Directly:

Toll Free:    1-800-780-3776
Int'l Phone: 770-957-9599
Int'l Fax:     770-957-9563
E-Mail: Email Your Request

| Home | Services | Search PPI | Contact Us |

© 2000 to 2007. Power Plus International. All rights reserved.
Mailing Address:
Power Plus International
309 Westridge Parkway
McDonough, GA 30253
   

Home | Services | Contact Us | View Cart

Boiler Glass | Boiler Controls | Condensate Pumps | Gaskets & Rope | Gauges | Level Controls | Pumps | Steam Traps | Tube Bundles | Valves