The Bushing Check Valve is compactly housed in
a common
reducing coupling. It's size makes this check valve
convenient for use as a vacuum breaker or low
pressure relief valve.
The Connector Check Valve is designed for use
in applications where male pipe threads are required. The
hex nipple or connector housing design allows for ease in
installation either as a check valve,
vacuum breaker or low-pressure relief valve.
The Flange Insert Valve can be installed in
any ANSI class 150, 300, or 600 flanged connection in the
system, horizontally or vertically with no alterations to
existing pipe necessary. Simply spread a flanged joint,
insert the check valve, and tighten the bolts.
The Mini-Check Valve is a three piece
construction check valve. The MCV is designed
to work well in smaller pipe and/or tubing applications. Its
three piece design allows for many different end connections
with NPT on both ends or with NPT on one end and tubing on
the other.
The Tubing Check Valve is a three-piece
constructed check valve designed for use with straight metal
tubing. The TCV is furnished complete with ferrules and nuts
for compression tube connections. The housed design of the
TCV allows for minimum pressure drop when a light spring
setting is used.
The Tubing Check Valve-Flared is a three-piece
construction check valve with 37° flared ends
that conform to J.I.C. abd SAE Hydraulic standards. The
housed design allows for minimal pressure drop when a light
spring setting is used.
The Universal Low (to 3,000 psig) pressure check
valves have a single piece body construction
machined from bar stock. These economical check valves
are designed for maximum flow with minimum pressure drop.
The High (to 10,000 psig) pressure check valves have a single piece body construction machined from bar
stock. These economical check valves are
designed for maximum flow with minimum pressure drop.
