United Brass Y Blow Off Valves

United Brass Model 226UT Y-Blow Down Valve
Class 200 (200 WSP @ 406° Max)
400 Water-Oil-Gas
PTFE Teflon® Disc, Integral Seat

United Brass is a ISO 9001 registered manufacturer and the model 226UT complies with MSS-SP-80-97. This valve model has a PTFE Teflon® disc and is rated at 200 WSP at 406° max. 100% pressure tested and threaded connections make this valve easy to install.

United Brass Model 325U Y-Blow Down Valve
300 Lb. Steam Pressure
600 Water-Oil-Gas
Seat & Disc 400-500 Brinnell Stainless Steel

The class 300 Y-Blow down valve has threaded ends, swivel disc holder, rising stem, and is 100% pressure tested. The seat & disc are made of Brinnell stainless steel.

NOTE from the Manufacturer: Care must be taken in blow down piping so that no water hammer effect causes shock to the "Y" blow down valve, especially in cases where a boiler has two blow down lines. In such cases, both lines should be piped to a common set of blow down valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.

Model 226UT, Class 200 Y-Blowdown Valve
Size	1"	1-1/4"	1-1/2"	2"
A Dim.	4.75	5.56	6.25	7.75
B Dim.	5.75	7.00	7.75	8.75
Ship Weight	4.20	6.10	9.00	15.00
Price	$210.21	$261.43	$340.99	$487.56

Model 325U, Class 300 Y-Blowdown Valve
Size	1"	1-1/4"	1-1/2"	2"
A Dim.	4.75	5.56	6.25	7.75
B Dim.	5.75	7.00	7.75	8.75
Ship Weight	4.75	6.25	8.60	15.11
Price	$342.75	$451.15	$480.89	$772.75

Contact Us Directly:

Toll Free: 1-800-780-3776
Int'l Phone: 770-957-9599
Int'l Fax: 770-957-9563
E-Mail: Email Your Request

Mailing Address: Power Plus International
143 McDonough Parkway
McDonough, GA 30253