Ball Valves | Butterfly Valves | Control Valves | Float Valves | Gate Valves | Globe Valves | Knife Gate Valves

jomar model t-100-03

Model T-100-03

Jomar S-100 Ice Maker

Jomar's Model S-100 ST ice maker valve is designed to replace the non-code saddle clamps on your 3/4" main copper line. Many states are adopting new construction codes which makes using saddle clamps illegal for ice-maker connections. You can use 1/4" plastic or copper line from the ice-maker by using compression sleeve and nut, or when the valve can be used as a drainable valve with waste nut.

This is Jomar's 100% full port valve with 1/4" side tap and T-handle. The extra long copper extensions reduce the chance of damaging the seats while soldering. Double viton o-rings prevent stem leakage.

Note: Minimum order of $75.00

Jomar Model S-100 ST
Material Specifications
Body - Hot forged Brass End - Hot Forged Brass Ball - Extremely Hard C.P. Brass Seat - Virgin PTFE Stem - Extruded Brass	Packing - Virgin PTFE O-Rings - Viton Gland - Extruded Brass Fixing Screw - Coated Steel Handle - Aluminum

Model T-100-03


Dimensions in Inches
Valve Size	Part No.	Price	A	B	C	D	E	F	CV*
1/2"	100-823	$15.00	2.48	1.24	0.59	0.63	2.285	1.24	20.25
3/4"	100-824	$20.00	3.26	1.63	0.79	0.88	2.285	1.49	41.83
1"	100-825	$31.00	3.93	1.97	1.00	1.13	2.285	1.97	78.3
*The CV factor is the gallons of water per minute passed through the valve with 1 PSI pressure drop.

Contact Us Directly:

Toll Free: 1-800-780-3776
Int'l Phone: 770-957-9599
Int'l Fax: 770-957-9563
E-Mail: Email Your Request

Mailing Address: Power Plus International
309 Westridge Parkway
McDonough, GA 30253