|
|
||||||||||||||
|
|
||||||||||||||
  -A better Way to Eliminate Shutdowns! -Can be installed in 30 minutes or Less -Sizes 1/2" - 2" Available -End Cap/Clean Out over Serves as a Line Tap by the Use of an Adaptor -For use on copper tubing
3/4" IN STOCK AND READY TO SHIP |
|
|
|
|
| Model T/S-100-N Ball Valve | |
 
|
|
| Model T/S-100-MS Ball Valve | |
  -The ULTIMATE in Memory Design -Dacromet/Rust Resistant Rugged Steel Handle -Vibration Resistant Self Locking Nut -Memory Stop -Adjustable Packing Nut Threaded to Body -Explosion Proof Stem Bottom Loaded -Double Viton O-Rings to Prevent Stem Leakage -Two Piece Hot Forged Brass Body - Eliminates Pinholes -Solid Ball - Extremely Hard C.P. Brass Option: 316 SS Ball and Stem |
|
| Model T/S-100-SSN Ball Valve | |
  -Meets ALL Local Codes -Corrosion Resistent -Nickel Plated Brass Body -316 SS Ball and Stem -Double Viton O-Rings to Prevent Stem Leakage -6 Valves in one -100% Full Flow -40°F to 366°F -600/500/400 W.O.G. |
|
| Model S-650-CE-4B Ball Valve | |
|
-Nickel Plated/Rust Resistant Rugged Steel Handle  -Slip-Loc -Double Vition O-Rings (Standard) To prevent Stem Leakage with RTFE Stem Washer -Nickel Plated Stem Nut -Adjustable Packing Nut Threaded to Body -Chrome Plated Brass Ball and Brass Stem -(2) "K" Copper Tube Extensions in Inches -Blow-Out Proof Stem Bottom Loaded with RTFE Stem Seal -Nickel Plated/Rust Resistant Steel Bolts -Three Piece Hot Forged Brass Body - Eliminates Pinholes -RTFE Body Seal/Seats |
|
  -100% Flow -Double Viton O-Rings to Prevent Stem Leakage -Optional Red Aluminum T-Handle -600 W.O.G. -Double Viton O-Rings to Prevent Stem Leakage -Virgin PTFE Seats |
|
 -Nickel
Plated/Rust Resistant -Rugged Steel Handle-Slip-Loc -Double Viton O-Rings (Standard) To Prevent Stem Leakage With RTFE Stem Washer -Nickel Plated Stem Nut -Adjustable Packing Nut Threaded To Body -Chrome Plated Brass Ball and Brass Stem -(2) "K" Copper Tube Extensions in Inches -1/8" Purge - Port -Nickel Plated/Rust Resistant Steel Bolts -RTFE Body Seal/Seats |
|
  -Sizes 1/2" - 2" -Double Viton O-Rings to Prevent Stem Leakage -Locking Device Available -Less Expensive, Faster and Easier Installation |
|
  -No More Debris in Your Face or Eyes as You Change out a Valve! -Temperature range of -40°F to 300°F -Eliminates Multiple Piping Connections -Requires only a third of the space of components it replaces |
|
|
|
|
  -Available with Lever, T, or Slo-Ball handle -Temperature Range: -40°F to 300°F -150 WSP -600 WOG -Actuator Pad Side-Tap -100% Full Port -Sizes 3/8" - 2" |
|
  -Side Tap -100% Full Port -Sizes 3/8" - 2" -150 WSP -600 WOG -Temperature Range: -40°F to 300°F -Double Viton O-Rings to Prevent Stem Leakage |
|
  -Pitch the Slo-Ball and WIN -100% Full Port -150 WSP -600 WOG -Suitable for Steam & High Pressure Water, within limits -Double Viton O-Rings to Prevent Stem Leakage -360° Gear Closing Handle |
|
  -Replaces Non-Code Saddle Clamps on 3/4" Main Copper Lines -125 WOG -Double Viton O-Rings to Prevent Stem -Leakage -100% Full Port -Extra Long Copper Extensions to Reduce the Chance of Damaging Seats While Soldering |
|
|
|
| Services | Search PPI
| Contact Us | |
|
