|
For use on black and galvanized pipe
Note: Minimum
order of $75.00
|
We found a
better way to ELIMINATE
shutdowns!
A High-Tech Fluid Control Device
Designed to Slash Maintenance Costs.
|
 |
 |
The End Cap/Clean Out Cover
Serves as a Line Tap By the Use of an Adaptor |
|
|
 |
|
 |
|
|
|
The Add-A-Valve is an
Emergency Shut Off Tool used to install a new
valve or remove a defective valve.
A defective valve may be replaced or a new ball
valve may be installed on hot (220°F/104°C) or cold
water, including hot or chilled H2O Glycol systems,
under pressure, from 0 to 250 PSI/17 bar maximum, on
schedule 40/80, black or galvanized, steel and schedule
40/80 PVC/CPVC piping, without shutting off the water,
in 30 minutes or less.
Important Notice: On Sizes 1-1/4" - 2" on
Multi-Story Buildings, the pumps must be shut off prior
to the Add-A-Valve package installation. |
Size Range: 1/2" - 2"
|
|
Part No. |
Size |
Price |
|
800-203ADD |
1/2" |
$320.00 |
|
800-204ADD |
3/4" |
$430.00 |
|
800-205ADD |
1" |
$675.00 |
|
800-206ADD |
1-1/4" |
$1,075.00 |
|
800-207ADD |
1-1/2" |
$1,380.00 |
|
800-208ADD |
2" |
$2,090.00 |
|
|
Note: Add-A-Valve-2 package includes S-100 DUE of
comparable size (1/2"-2"), along with one 1/4 pint of JomarSeal Tighter-Than-Tite Pipe Joint/Gasket Thread
sealant with alternate Teflon seal and two air test end
caps with Schrader valves mounted. |
|
|
